Cleaning and maintenance
28
5.2
Errors
Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.
If several errors occur, the error messages are displayed alternately.
Error elimination is acknowledged by pressing the START/STOP button.
If the error cannot be cleared, inform Customer Service - see page 2.
More detailed information regarding the error description and solutions is
available in 'Fehlercodes/Error Codes' (Order-no. 1008954-..).
5.3
Cleaning
DANGER!
Infections can be spread by skin contact!
All objects / device parts, which may come into contact with
the user during use, must be disinfected after every use:
–
Holding bars and control panel
–
Protective goggles
–
MP3 cable
–
Acrylic glass panels
–
Foot mat (Plastic) / mirror
NOTE:
For thorough disinfection, the application time must be ad-
hered to. Follow the manufacturer's instructions for use.
5.3.1
Cleaning the surfaces
Acrylic glass panel
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
–
For the fast, hygienic and proper cleaning of acrylic
glass surfaces, use specially developed cleaning
agents.
–
Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
never be used for cleaning.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.