Inocal MTRU-W Montageanleitung Seite 15

Operating instructions
Setting the day-time temperature
To set the day-time temperature, use the room temperature regulator (7).
Minimum-maximum room temperature
It is often useful to define individual minimum and maximum room
temperatures in order to save energy. To do this, remove the regulator knob
(7) and move the limit tabs (11 and 12) to the new setting. Push knob (7)
firmly back into place.
Setting the night-time temperature reduction
The ex-factory (default) setting for the temperature reduction is 4 K
(day-time temperature minus night-time temperature = 4 K, the arrow points
to the white line).
You can increase this value to as high as 10 K by turning the potentiometer
knob (6) as required.
Faults, break-down
Always inform your electrician if faults occur.
The clock has to be re-set following power failures of moore than 72 hours.
Disposal of old equipment
This device must be disposed of by a recycling company (Nickel-Cadmium
battery). Never put it in a household garbage container.
15