Abus Security Center TV8239 Installationsanleitung Seite 18

Preface
Dear Customer,
Thank you for purchasing this Quad. You made the right decision in choosing this state-of-the-art technology,
which complies with the current standards of domestic and European regulations. The CE has been proven
and all related certifications are available from the manufacturer upon request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these operating
instructions! In the event of questions, please contact your local specialist dealer.
This Quadrant Divider is used in combination with video sources (cameras) and recording devices (VHS or
digital recorders) for the purpose of property surveillance. Up to 4 video signals can be processed
simultaneously. Loss of video signal can be visually and acoustically indicated. Furthermore, the Quad has
an alarm output for controlling other components such as a video recorder. An integrated motion sensor can
register changes in the picture content and send an alarm signal via a built-in signalling device.
Precautions
The Quad and connected components must be kept free of moisture (cellars and similar surroundings are to
be strictly avoided). Use of this product for other than the described purpose may lead to damage of the
product. Other hazards such as short-circuiting, fire, electric shock, etc., are also possible. The mains
transformer is designed for operation with mains electricity at 230 Volt AC / 50 Hz.
No part of the product may be changed or modified in any way. Connection to the public power network is
subject to country-specific regulations. Please be aware of applicable regulations in advance.
To avoid fire and injury,
observe the following:
•
Install the device
safely in a dry
location in the building.
• Make sure there is
sufficient ventilation.
Do not expose the device to
•
temperatures less than -10°C
or more than 50°C.
• The device is designed for
indoor use only.
• Humidity must not exceed
85% (non-condensed).
• Ensure that the voltage is
disconnected when
performing work on the device.
Please observe the following
regulations to ensure trouble-
free operation of your device.
The Quad is supplied by a
•
12V DC transformer.
• The mains transformer should
be connected
via a separate
fused line to the local
230VAC network.
• Connecting the device to
the local mains network is
subject to country-specific
regulations.
18
General:
Improper or careless installation
work may lead to faults and poor
image quality. Therefore please
read the instructions very carefully
and follow the installation
instructions for lines and
components precisely.
The manufacturer
reserves the right to make
technical modifications at
any time
.