Walimex Pro LED 80 dimmbar Gebrauchsanleitung Seite 17

■ Make sure that cables and cable wires are free of damage. This
could be caused e.g. by exposure to heat, chemical or mechanical
influences such as chafing, buckling, tearing, rolling over or
chewing pets.
■ Take care to prevent the equipment from dropping down.
If the device has dropped down on the floor have it inspected by a
skilled electrician before you switch it on again.
■ Should the equipment be damaged or defective, or if you notice a
scorching smell:
Immediately interrupt the electric power supply by removing the
batteries. Do not operate the device with a damaged housing, do
not repair the device yourself. Have the device only repaired by a
skilled electrician
■ Always keep your device in good condition, as specified in these
instructions for use.
■ For this device use only spare parts and accessories which comply
with the prescribed specification. See technical specifications.
WARNING
Danger of cutting and splintering caused by bursting illuminant.
Illuminants can break or splinter when banging against the device.
Splinters can cause eye and skin injuries.
■ Handle illuminants with care, to avoid breakage.
■ Make sure you do not touch the illuminant by accident when
mounting or replacing accessories.
17