Default Setting Of The I² Control-37 - Miditech i2 Control-37 Bedienungsanleitung

Default Setting of the i² Control-37
The i² Control-37 will always select the following values for their parameters when the
power is turned on.
*Transmit MIDI Channel no. 1.
*Default Octave will be from C2 (36) to C5 (72)
*Default Aftertouch value will be 0
*Default Velocity value will be 0
*Default Reverb Depth value will be 64
*Default Pan Pot value will be 64
*Default Volume value will be 127
*Default CC Data value will be 0
*Default CC no. value will be 0
*Default Control Change (CC-00=0, CC-32=0) message will be transmitted.
*Default Program Change (PG=1) message will be transmitted.
*Preset Memory value will be 1
*Real-time Controller 1 - 12 with preset 1 (see appendix)