CLOCK & CALENDAR
Press "CLOCK" to toggle display between time, calendar and day of the week.
Hold "CLOCK " button to enter clock setting mode. Using "
"or " " to adjust and "CLOCK"
to confirm, the following values can be set in sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > EXIT
MOON PHASE
Moon phase is displayed according to the current calendar.
HOME TIME, WORLD (ZONE) TIME
Hold "ZONE" to enter world (zone) time setting mode. Press " "or " " to enter the desired
hour offset value from –12 to +12 hours. Press "ZONE" to confirm each setting.
Press "ZONE" button to toggle between home (radio-controlled) time and world (zone)
time. "ZONE" icon appears when world (zone) time is selected. When zone time is not
used, set zone time to "0".
SLEEPING TO NATURE SOUNDS WITH TIMER
The unit features a sleep timer with 5 selectable nature sounds (Bird#1, Bird #2, Windy,
Rainy & Thundering).
Press "SLEEP" button to activate a 90-minute sleep timer and play the current weather
forecast nature sound. Continue pressing "SLEEP" to select a 90-, 60-, 45-, 30-, 15-minutes
sleep timer. Select "OFF" to turn off the sleep timer.
Any time during the timer mode, press "SNOOZE/LIGHT/SOUND" repeatedly to select one
of the 5 nature sounds. Use the VOLUME slide switch on the side to adjust volume level.
** This function is available only when adapter is connected
ALARM SETTING
Press "ALARM" to show alarm time and "AL. " icon will appear. Press again to enable or
disable the alarm. Bell icon "
" appears when alarm is enabled.
Hold "ALARM" to enter alarm time setting mode. Press "
"or "
" to enter the desired Hr/
Min values and press "ALARM" to confirm setting.
SNOOZE & BACKLIGHT
When alarm is going off, press SNOOZE/ LIGHT/SOUND to trigger snooze alarm and "Zz"
icon will appear. To stop alarm for one day, press "ALARM" key. Press SNOOZE/LIGHT/
SOUND for an extended backlight if adapter is not connected.
LOW BATTERY INDICATION
Low battery indication is available for the home unit itself and all of the 3 remote
channels. Replace the batteries and follow the setup procedure in this instruction manual.
18
W160 Mebus_IM.indd 18
9/30/06 10:47:53 AM