LANCOM ES-2126+ Bedienungsanleitung Seite 224

Description:
To set up the parameters of STP.
Argument:
<Bridge Priority>: priority must be a multiple of 4096,available from 0 to
61440.
<Hello Time>: available from 1 to 10.
<Max. Age>: available from 6 to 40.
<Forward Delay>: available from 4 to 30.
Note: 2*(Forward Delay -1) >= Max Age
Max Age >= 2*(Hello Time +1)
Possible value:
<Bridge Priority>: 0 to 61440.
<Hello Time>: 1 to 10.
<Max. Age>: 6 to 40.
<Forward Delay>: 4 to 30.
Example:
PSES-2126C(stp)# set config 61440 2 20 15
set port
Syntax:
set port <range> <path cost> <priority> <edge_port> <admin p2p>
Description:
To set up the port information of STP.
Argument:
<range>: syntax 1,5-7, available from 1 to 26
<path cost>: 0, 1-200000000. The value zero means auto status
<priority>: priority must be a multiple of 16, available from 0 to 240
<edge_port>: Admin Edge Port, <yes|no>
<admin p2p>: Admin point to point, <auto|true|false>
Possible value:
<range> :1 to 26
<priority> : 0 to 240
LANCOM ES-2126+ und LANCOM ES-2126P
Kapitel 5: Operation of CLI Management (englisch)
<path cost>: 0, 1-200000000.
<edge_port> : yes / no
223