Local Commands Of Cli - LANCOM ES-2126+ Bedienungsanleitung

Saving user...
Save Successfully
PSES-2126C#
5.2.2

Local Commands of CLI

Please note: to use one of the local commands, you first have to change to the
corresponding configuration area, e.g. 802.1x <Enter> set mode 1.
802.1x
set max- request
Syntax:
set max-request <port-range> <times>
Description:
The maximum number of times that the state machine will retransmit an
EAP Request packet to the Supplicant before it times out the
authentication session.
Argument:
<port range>: syntax 1,5-7, available from 1 to 26
<times>: max-times, range 1-10
Possible value:
<port range> : 1 to 26
<times> : 1-10, default is 2
Example:
PSES-2126C(802.1x)# set max-request 2 2
set mode
Syntax:
set mode <port-range> <mode>
Description:
To set up the 802.1X
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<mode> : set up 802.1x mode
0:disable the 802.1x function
LANCOM ES-2126+ und LANCOM ES-2126P
Kapitel 5: Operation of CLI Management (englisch)
mode of each port.
authentication
145