LANCOM ES-2126+ Bedienungsanleitung Seite 144

choose N or n, the IP address will keep the same one that you had saved
before.
If restoring default successfully, the CLI would prompt if reboot
immediately or not. If you press Y or y, the system would reboot
immediately; otherwise, it would be back to the CLI system. After restoring
default configuration, all the changes in the startup configuration would
be lost. After rebooting, the entire startup configuration would reset to
factory default.
Argument:
None.
Possible value:
None.
Example:
PSES-2126C# restore default
Restoring ...
Restore Default Configuration Successfully
Press any key to reboot system.
restore user
Syntax:
restore user
Description:
To restore the startup configuration as user defined configuration. If
restoring default successfully, the CLI would prompt if reboot immediately
or not. If you press Y or y, the system would reboot immediately; others
would back to the CLI system. After restoring user-defined configuration,
all the changes in the startup configuration would be lost. After
rebooting, the entire startup configuration would replace as user defined
one.
Argument:
None.
Possible value:
None.
Example:
PSES-2126C# restore user
LANCOM ES-2126+ und LANCOM ES-2126P
Kapitel 5: Operation of CLI Management (englisch)
143