Lubrication Instructions; Running Belt Adjustment - Skandika Fitness SF-1500 Aufbau- Und Bedienungsanleitung

Lubrication instructions

Running belt adjustment instructions
Fig.9
ASSEMBLY INSTRUCTIONS
A. Lubricate your running deck if it's too dry or eve-
ry 6 months to maintain optimal performance.
NOTE: Lubricant is optional, please contact
your supplier to gain more information.
B. Insert the spray nozzle (B) into the spray head
of the lubricant can (A).
C. While lifting the side of the running belt, gently
position the spray nozzle with little drop bet-
ween the running belt and the running deck
from the front of the treadmill to the rear.
NOTE: If you lubricate too much, the run-
ning belt may slip or liquid may flow out
from the machine.
D. Repeat the above procedure on the other side
of the belt.
E. Then run the treadmill without anyone on it for
at least 2~3 minutes to let the lubricant spread
evenly across the running deck and underside
of the running belt.
F. Check the running belt whether is off-center or
slips - if it does, go to page 20 to center the belt
or adjust the belt tightness until the running belt
Fig.8
has been tightened properly.
G. Plug in the power cord to start using the tread-
mill.
A. Open the Storage Door (13).
B. Allen Wrench (35) is attached on back of the
Storage Door (13).
C. To adjust the belt, follow the steps on the next
page.
ENGLISH
19