Figure 3-10: Secureeasysetup Complete - Linksys WUSB54GS Benutzerhandbuch

Wireless-G USB Network Adapter with SpeedBooster
3. Press the Cisco logo or SecureEasySetup button on the wireless router or access point. When it turns white
NOTE: You can only add one SecureEasySetup device at a time.
flashing on the wireless router or access point when the Adapter has been successfully added
to the network. Repeat this procedure for any additional SecureEasySetup device.
4. When SecureEasySetup is complete, you may save your configuration to a text file by clicking the Save
button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your
network.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 4: Using the Wireless Network Monitor.
Chapter 3: Setting up and Connecting the USB Network Adapter
Setting Up the Adapter
Congratulations! Setup is complete.
and begins to flash, click
the Next button on the
Setup Wizard screen. The
logo or button will stop

Figure 3-10: SecureEasySetup complete

10