Edit Channel Name; Selecting Languages (Menu, Sound, Subtitle); Volume Control / Mute Button; Last Channel - Schwaiger DSR 6006T Bedienungsanleitung

9.8 Edit Channel Name

If you would like to change or amend the names of TV or radio stations in the program lists ("Total
List" or "Favorites List") you can do so in "3. Edit Channel Names" in the menu, "Channel
Manager". Select the corresponding program list with the
OK. Select the name to be edited with the
You can change the letters of the previous name with the
by one.
Use the
After completing the entry, confirm the new name by pressing the OK button.

9.9 Selecting Languages (Menu, Sound, Subtitle)

You can select the Language for menus and the main language for Sound and Subtitles from
several options in the menu "General Settings". The software version of the receiver determines
the available languages; the selection might differ among different countries.

9.10 Volume Control / MUTE Button

Use the VOL (+) and VOL ( - ) buttons on the remote control to adjust the basic volume level of
your TV. When either button is pressed, the volume indicator appears on the TV screen. When you
have finished adjusting the volume, the volume indicator disappears automatically.
Note : Volume control is optimized when you select a basic volume level as high as possible on the
GB
receiver and then adjust the preferred volume on your TV.
Press the MUTE button on the remote control to turn off the sound temporarily.
Press the MUTE button again to turn the sound back on (cancel MUTE).

9.11 Last Channel

To return to the last channel you were watching, press the LAST button on the remote control.

9.12 Audio Mode

Audio Language and the Audio Mode can be selected if the Service Provider supports this feature.
Press the AUDIO button on the remote control.
To change the audio language, use
broadcaster.
Use the
MONO (L), or MONO (R) as well as Digital Audio "AC3" (for DOLBY Digital / Linear PCM
Stereo). If there is no "AC3" audio available, this menu item will not show.
When selecting "AC3" and connecting a Dolby Digital or Linear PCM Stereo equipment to the
DIGITAL AUDIO Output jack on the rear panel, the analogue audio output channels are disabled.
To return to viewing mode, press the AUDIO button again or press the EXIT button.

9.13 Parental Lock

This allows you to lock particular channels or the receiver itself.
For example, you can prevent your children from accessing
adult programs using this function.
Select "Parental Lock Manager" from the Main Menu.
When the "Enter Password" message appears, enter the
password. The factory default user password is '0000'
Select "Channel Lock" when you wish to lock specific
channels only.
Select the program list containing the channel to lock with the
the name of the channel to be locked with the
padlock symbol is displayed. You can remove the lock by pressing OK again.
If you want to lock the receiver completely, navigate to the menu "Parental Lock Manager" and
select the option "ON" with the
can only be operated by entering the password.
Access to recordings saved on hard disk can be protected with a password. Select "On" with the
- buttons.
buttons to select the letters a number, an indication or blanks.
buttons to select the Audio Mode you want. You may select analogue STEREO,
buttons. Even after switching it on, the receiver is locked and
buttons and launch it by pressing
buttons and press OK.
button on the remote control one
buttons to select one of the languages provided by the
buttons and mark it by pressing OK. A
buttons and press OK. Select