Additional Settings And Operation Functions; Setting Date And Time / Summer Time; Setting Tv Aspect Ratio And Tv Signal Format - Schwaiger DSR 6006T Bedienungsanleitung

4. Skipping automatically unwanted commercial spots during playback
Start playback (normal or FF / REW).
At the beginning of a commercial spot press WHITE (Subt.)
button. A "skip mark" will be put.
Move on to the end of a commercial spot and press WHITE
(Subt.) button again. An other "skip mark" will be put.
A window "Do you want to skip?" will appear. Confirm with OK.
The skipped portion of the recording is color-marked on the
playback status bar. During all future playback sessions this
portion will be skipped automatically.
Up to seven (7) commercial spots per file (recording) can be
skipped this way.
Delete skip markings: Press "Del" button during playback.
5. Repeat A - B Function
Start playback. Press "i" (Info) button. A playback status bar
appears.
Press YELLOW button in order to mark the start point (A) of a
section to be repeated.
Move on to the end point (B) of the section to be repeated.
GB Press YELLOW button in order to mark the end point (B).
The section between A and B will be repeated endlessly.
To stop repeat playback and resume normal playback press
YELLOW button again or press
6. Direct Jump Function (Time-controlled Jump Function)
Start playback. Press "i" (Info) button. A playback status bar appears. Total recording time and elapsed
playing time are being displayed.
Enter the desired time marking in HH MM SS format, using the numeric buttons. Confirm with OK.
Playback will start at the desired position.
Example: The desired movie scene starts 7 minutes and 25 seconds after the start time of the
recording. In this case, enter 00 07 25, confirm with OK.

9. Additional Settings and Operation Functions

Along with basic and frequently used functions, this receiver offers additional convenient options
and an extensive area of settings that will be outlined in this section.

9.1 Setting Date and Time / Summer Time

Date and time are integral components of the Service Information (SI) transmitted by stations and
are automatically processed by the receiver -- usually after receiving a few groups of 10 seconds
each of a broadcast. Sometimes, however, it may be necessary to make corrections. For example,
corrections must be made in cases where the power supply has been interrupted while a
scheduled recording was in countdown timer mode. A request to set the current time will be
displayed. Please wait a few seconds to complete the reception of time signals and confirm the
time displayed in the menu by pressing OK.
During Summer Time (Daylight Saving Time) the option "Summer Time" in the menu "General
Settings" has to be enabled. Otherwise all EPG information is off by one hour.

9.2 Setting TV Aspect Ratio and TV Signal Format

Depending on your TV set, you can adjust the aspect ratio of the picture to the screen format in
"General Settings" (Normal 4:3 or Widescreen 16:9).
If your TV set offers the additional RGB signal format instead of the regular CVBS, you can have a
better quality picture by choosing RGB (menu "General Settings"). A further TV signal format (Y/C)
is provided at the output jack "S-Video" on the back panel of the receiver. However, Y/C s can only
be picked up by TV sets equipped with a corresponding input terminal and connected with a
special cable.
(Stop) button to stop playback.