Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Channel Manager
Delete
In the TV Channel Manager Page, press MENU
key on the RCU, and then select Delete on the
command menu. Then, sub-menu like Delete CH
and all will be displayed.
This Delete command allows you to delete the
channel permanently.
First select the channels, which you want to
delete, then selected channel number will be
changed to yellow X mark.
If you cancel the selection, press OK key again,
then the number will be back.
If you decided to delete, press EXIT key and then
Message box will be displayed. Press OK to
delete. And check whether the selected channels
are deleted on the channel list or not.
W
a
r
n
i
n
g
:
To perform this function, you should
W
a
r
n
i
n
g
:
set up the Parental Lock in advance.
Sort
In the TV Channel Manager Page, press MENU
key on the RCU, and select Sort on the command
menu.
This Sort menu has its sub command and it
allows you to sort the channels as you like.
You can sort the channels by Favorite, Lock,
Scramble and CH Name.
Place the cursor on your desired line, and then
press OK key. And check whether the channels
are sorted properly on the channel list or not.
Radio Channel Manager has the same
W
W
a
a
r
r
n
n
i
i
n
n
g
g
:
:
operation as TV channel Manager.
GB-24 Digital Terrestrial Receiver -
Channel Manager
Fast edit mode
Fast Edit mode allows you to edit channels faster
than normal without showing channels selected.
If you turn off the Fast Edit mode, receiver will
show each of channels selected in the small PIG
screen and it takes a few seconds more to edit
channels.
Go To
Go To function enables you to go to any page of
the menu tree by adopting Open Architecture
Concept for the implementation of software. This
powerful function makes the menu system be
user-friendly and easy-to-use.
How to use GO TO function.
1. Press MENU key on the RCU in the menu.
2. Select a TV Channel in the Channel Manager.
3. After your working in the TV Channel,
press MENU key on the RCU.
4. Then menu box will be displayed.
5. Select Go To menu and press OK key.
6. Sub-menu list will be displayed.
7. Select Timer and press OK key.
8. You can go to the Timer Page directly .
9. If you go back to TV Channel, repeat the
Go To procedures.
- Digital Terrestrial Receiver GB-25
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
