Checking Displays - Sharp MD-MT877H Bedienungsanleitung

Checking Displays

To check the elapsed time and remaining
time of the track
During playback, press the DISP button.
Each time the button is pressed, the display will change as
follows:
Track name
Elapsed playback
time
Remaining
playback time
Notes:
If the disc name or the track name was not originally re-
corded on the MiniDisc, "NO NAME" will be displayed.
Remaining recording time will not be displayed with a play-
back only MiniDisc.
Elapsed playback time and remaining playback time may
be different from the actual time.
To check the remaining recording time and
the total playing time
Whilst in the stop mode, press the DISP button.
Each time the button is pressed, the display will change as
follows:
<Main unit display>
Disc name
Total playing
time
Remaining
recording time
Total playing
time
Remaining time of recording varies depending on the set
recording mode.
If the remaining time of recording is over 100 minutes, the
last digit of the seconds is not displayed on the remote
control.
<Remote
control display>
E-32