Recording - Sharp MD-MT877H Bedienungsanleitung

Recording

Before Recording
Cancel the hold mode.
The portable MD does not work
whilst in hold mode.
As for the details, see page 12.
1
Press the REC button.
Record pause mode is entered.
2
Begin playback on the stereo system con-
nected to this portable MD.
To enable the record level to be set.
E-15
3
Press the 5 5 or 4 4 button to adjust the
5 5 4 4
5 4
recording level.
Analogue recording
Adjust the recording level so that the maximum sound
volume from the source makes the reading swing
somewhere between –4 dB and 0 dB.
Level meter indicator
Digital recording
You can adjust the level in 1 dB increments within
the range of +12 - –12dB.
Once you adjust the digital recording level, the set-
ting remains even after the recording stops.
(For cancellation instructions, see page 34.)
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode at
the point you wish to start recording.
Here you can select the track to be recorded.
5
Press the MODE button repeatedly to select
recording mode.
(Stereo recoding)
(2 times long recording)
(4 times long recording)
(Monaural recording)
0dB
4dB
+12 - –12dB