Herunterladen Inhalt Inhalt Diese Seite drucken

Basic Settings; Making A Recording - T+A CC 820 M Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Basic settings

Certain adjustments do not need to be made every time
you make a recording; you just need to make them once.
Amongst them are:
Choice of play mode (see 'Special Recorder
Functions').
Choice of DOLBY noise reduction system (B, C or
NR OFF) by pressing the appropriate 
When recording from the tuner, MPX filter on / off
(see Special Recorder Functions).
Making the recording
Once you have completed all the preparations for
recording, the tape deck should be in "record ready"
mode - the LED above the 
glowing.
For the recording process the 
buttons are used both to start the recording and to
interrupt it.
Start the recording at the appropriate moment
- Side A:
press the 
press the 
- Side B:
You can interrupt the recording at any time (e. g. to
skip a CD track, or to suppress advertisements or
verbal commentaries when recording from the tuner)
- Side A:
press the 
press the 
- Side B:
The Record indicator () in the screen area flashes
when the machine is in Record Pause mode.
Remember to resume recording after any interruption
- Side A:
press the 
- Side B:
press the 
End the recording process:
 / 
Note:
In addition to adjusting the bias, balance and level
settings before making the recording, you can also make
adjustments while recording is taking place.
 button.
 button must be
 and 
 button
 button
 button again
 button again
 button again
 button again
 button
34

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis