Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- The alarm sounds at the preset time for about 20 seconds, or until you stop
it by pressing any button.
- The alarm on indicator is only displayed at the time mode that the alarm is
set to refer to.
- Hourly chime sounds at every full hour, while it is turned on.
* If chime is turned on, confirmation sound will be given whenever a button
is pressed.
To switch between alarm 1 and alarm 2
Press B to switch between alarm 1 (indicated by AL-1) and alarm 2 (indicated
by AL-2).
To set alarm time and turn chime on and off
1. Hold down D until the hour digits start to flash on the display, which
indicates the setting screen.
2. Use A (+) and B (-) to change the setting. Holding down either button
scrolls the setting at high speed.
3. Press C to advance to the next setting as in the following:
C
HOUR
MINUTE
* When TIME 1 or TIME 2 is flashing, press A or B to switch between setting
the alarm to refer to Normal Time (TIME 1) and Dual Time (TIME 2).
* When ON or OFF is flashing, press A or B to turn the chime on (indicated
by ON) and off (indicated by OFF). If chime is turned on, the chime on
indicator will be shown after exiting setting screen.
4. Press D to exit the setting screen.
C
C
C
REFER TO
T1/T2
CHIME
ON/OFF
23
Werbung
