Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- North-South arrow is shown on circumference of the LCD.
* North is indicated by 1 flag and South is indicated by 3 flags.
- Declination correction is provided.
* Declination is the difference between true north and magnetic north.
Importance
1. The compass should be calibrated before use.
2. The compass must be kept in a level position when in use.
3. Compass readings are easily affected by disturbing sources of
magnetism, so the compass should always be
used in the open air.
To calibrate the compass
1. Hold down D until "CAL" is shown on the display, which indicates the
calibration screen.
2. Rotate the product slowly for 2 complete rotations.
* Each rotation must last for at least 15 seconds.
3. Press D and the ten-degree digit starts to flash on the display, which
indicates the declination angle setting screen.
* Press A will end calibration skipping the declination angle setting. In this
case, the declination angle is set to 0 degree.
4. Use A (+) and B (-) to change the setting. Holding down either button
scrolls the setting at high speed.
5. Press C to advance to the next setting as in the following:
C
TENS OF DEGREE
* When E or W is flashing, press A or B to switch between East and West.
* You should consult your local organization for information of declination.
C
C
DEGREE
E/W
9
Werbung
