Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- Press and hold button A for 3 seconds can store the current altitude data.
Characters "STORED" will be displayed at the top row when data is stored.
Maximum 20 altitude data can be stored and when memory is full,
characters "FULL" will be displayed and no further data can be stored.
Each altitude data stores the data number, month, day, hours, minutes and
altitude reading.
To calibrate altitude reading
1. Hold down D until the current altitude reading starts to flash on the
display, which indicates the setting screen.
2. Use A (+) and B (-) to change the setting. Holding down either button
scrolls the setting at high speed.
3. Press D to exit the setting screen.
* If there is no button operation for 2-3 minutes at setting screen, the
display will return to Altimeter mode automatically.
ALTIMETER DATA MODE
Time
Month-Day
Data number
Altitude reading
17
Werbung
