barigo 44 Bedienungsanleitung Seite 42

Use C to enter Altimeter mode.
* Mode prompt "ALTI" is displayed first.
- Altimeter mode indicator is shown.
- The altimeter is of 1 meter (or foot) resolution and with working range from
-700 meters (-2296 feet) to 9000 meters (29520 feet).
- Altitude reading in meters or feet selectable.
- Graph showing the changes in altitude is provided.
* Graph will be cleared only after battery replacement or reset.
- Maximum 20 altitude data can be stored.
Reading the altitude graph
The altitude graph shows the relative changes in altitude in the past with the
current altitude represented on the right. Each horizontal point represents 15
minutes while each column represents the relative reading of altitude in that
time.
* It is not possible to get the exact reading from the graph. User can only get
the trend of changes from the graph.
To switch between meters and feet
Hold down B until the unit indicator (M or Ft) stops flashing to switch altitude
reading between meters and feet.
To store altitude data
Hold down A until "DATA" stops flashing to store the current altitude data.
* "STORED" and data number are shown.
To view Acc. & Max Data
- Press button A will start the scrolling of accumulated altitude "ACC" and
maximum altitude "MAX" at the top row again just like entering Altimeter
mode.
15