barigo 44 Bedienungsanleitung Seite 43

- The altitude reading can be calibrated, the maximum altitude and the
accumulated altitude can be reset individually.
- Press and hold button D for 4 seconds ("CAL HOLD" displayed) to enter
altimeter calibration mode, altitude reading starts flashing.
- If there is no altitude changes for 30 minutes, weather icon will be
appeared.
- Press button A (forward) or button B (reverse) to calibrate the altitude
reading. Then press button C to select maximum altitude (MAX) or
accumulated altitude (ACC) for calibration. The sequence is shown as
follow:
Altitude calibration Reset maximum altitude
- For maximum and accumulated altitude calibration, press button A or B to
reset to zero.
- After all calibrations are completed, press button D to exit altitude
calibration mode.
Reset accumulated altitude
16