barigo 44 Bedienungsanleitung Seite 47

3. Press A again when the second runner finishes.
* You may record the finish time of up to 100 runners by pressing A.
4. Press B when the last runner finishes.
* Time measurement is stopped.
5. Hold down B until the next run number is shown on the display.
* Data of the current run is stored and chronograph is reset to all zeros.
* The finish times for the runners are the split times stored in Chronograph
Data mode.
To clear times in current run
1. Press B to stop the chronograph.
2. Hold down D until the chronograph shows all zeros.
* Times in current run are cleared.
To show number of unused lap
When the chronograph shows all zeros, press E and the number of unused
lap (indicated by "FREE") will be shown for 3 seconds.
* Returns to chronograph display automatically after 3 seconds or when any
button is pressed.
20