Network Configuration; Login Device In Web Interface - urmet 1093 Anleitung

5.3

NETWORK CONFIGURATION

Select [Main Menu Network] to access network configuration. To configure the device for the local network, follow the
procedure below.
Select the desired network [Static], [DHCP] and [PPPoE].
For [Static] type, assign an IP address to the device, and check that [Client Port], such as 9000, and [Http Port],
such as 80, have been assigned. Please refer to picture below.
For [DHCP] type it is possible to set the Client Port and HTTP Port as above and the network will automatically
assign a dynamic IP address, that can randomly change.
Save the changes by clicking on the button [Apply] and exit from the DVR OSD menu.
Reboot the device, as required, and wait until this operation has been completed.
NOTE:
For further details about the Network configuration Menu and Mobile and Internet Configuration Menu, see the
respective sections on the user manual, available in the CD provided with the product.
5.4

LOGIN DEVICE IN WEB INTERFACE

The instructions below describe how to access and configure the device web pages via LAN and Internet Explorer:
Launch Internet Explorer and enter in the address bar the DVR IP address and the DVR HTTP
o
port, as http://IP Address:HTTP Port. If the DVR HTTP port is 80, enter only the DVR IP address,
as http://IP Address
If the installation of an ActiveX component is required, check that this operation is performed
o
as follows:
DS1093-089
Double click on the icon
The following screen will appear (or the default first page):
Select from the menu of the Internet Explorer window the item "Tools → → → → Internet options"
to open the browser Internet Explorer.
38