Ref. 1093/016 Dvr Back Panel; Rs485/Sensor/Alarm Port Functions - urmet 1093 Anleitung

2.2.5

REF. 1093/016 DVR BACK PANEL

Item Physical port
1
Video input
Video output
2
Audio input
3
Audio output
4
Audio input
5
Ethernet Port
6
Power Switch
7
HDMI
8
VGA Port
9
USB Port
10
RS-485/Sensor/Alarm
11
Power Port
12
2.2.6

RS485/SENSOR/ALARM PORT FUNCTIONS

Alarm input: Connect [-] port of your sensor to G (GND) pin, and [+] port to channel input according to the alarm device
you purchased.
Alarm output: Connect to the two ports marked with "out"
PTZ Port: Connect your camera to RS-485A and RS485B accordingly.
DS1093-089
Connection method
Connect CH1-16 (Virtual) video input (BNC interface)
(UP) Main video output; (Down) Spot output (BNC interface)
Connect CH1-4 audio signal input (BNC interface)
Connect audio signal output, including spot audio output (if available,
depending on DVR Model) and main audio output (BNC interface)
Connect (CH5~CH16) Audio input
Connect LAN, Ethernet (RJ45 interface)
Turn Power on and off
HDMI Output (for future use, not currently available)
Connect to VGA monitor, such as PC monitor
Connect USB mouse
RS485/Sensor/Alarm interface (see pin outs below)
Connect power supply - DC12V 5A
31