X-vue K11 Bedienungsanleitung Seite 81

12. Q&A – frequently asked questions
BLACKBOX
1. Does recording also start after GPS reception?
No, it starts as soon as the engine is powered up.
2. How can I view the recorded videos?
 Please use the K11 VIEWER provided from the manufacturer.
3. What happens if the memory of the SD card is full?
 When the memory is full, the earliest recorded files start to be deleted.
4. How can I eject the Micro SD card?
 First, disconnect power and then remove the memory card. When injecting, on the other hand, plug
the power cable after inserting the SD card.
5. Event recording is too often.
 Change the sensitivity of the G-sensor as ―insensitive detection‖ by pressing the G button.
How to upgrade firmware
1. First, copy the firmware upgrade file in the Micro SD card. Then insert the memory card to K11.
2. Supply power and push the left button on the rear side of K11 until the blue LED is on.
3. Wait for about 1 minute. When upgrade is completed, K11 automatically starts operating with voice
instruction.
4. If voice instruction starts with the blue LED turned off during upgrade, it means that upgrade failed. Start
over from the first step.
39