X-vue K11 Bedienungsanleitung Seite 69

8. Setting
BlackBox
G(G-sensor shock):
1. This is to set the impact level that a G-sensor installed in K11 detects.
1
Press button
2. You can change the setting with button
pressed, the voice message changes as follows: ―sensitive detection‖ ->
―normal detection‖ -> ―insensitive detection‖. Stop pressing when you
hear the mode you want. If you think K11 records impacts too often set
the mode as ―insensitive detection‖.
VS(Video Size) : This is to set the resolution of the recorded video.
2
Press button then you will hear ―resolution setting‖. Every time
4
button is pressed
-> ―VGA‖ -> ―D1‖. QVGA(320*240), VGA(640*480), D1(720*480)
RT(Recording Time) :
This is to set the recording time of the video. When you press button
recorded voice says ―recording time setting‖ and ―it is set as 40 seconds‖.
40 seconds is the only option in this setting.
then you will hear ―impact level setting‖.
4
, the voice massage changes as follows‖ ―QVGA‖
Every time the button is
3
4
1
2
3
27