X-vue K11 Bedienungsanleitung Seite 68

8. Setting
LDWS
CR(Calibration Reset) :
1. If K11 operates incorrectly while FCWS and LDWS, you can start
recalibration by pressing button
WS(Working Speed) :
1. This is to set the working speed of Lane Departure Warning
3
2. Press button
Set the speed with button
3. Every time the button
changes as follows: ―60km/h‖ -> ―70km/h‖ -> ―80km/h‖. Stop
pressing when you hear the speed you want and wait for a
moment it is automatically set.
1
You will hear ―calibration reset‖.
then recorded voice says ―working speed setting‖.
2
is pressed the voice message
2
1
3
26