X-vue K11 Bedienungsanleitung Seite 73

9. Function description
(8) LED operation and emergency measure
① Both red and blue LEDs on:
After booting, all functions (constant/event/manual recording) are normally operable.
② Blue LED on and re LED blinking:
Storing of an event (during constant/event/manual recording mode). The red LED keeps
blinking until the storing is completed. After that, both blue and red LEDs are turned on.
③ Red LED on and blue LED blinking:
First, if the power cable is connected without the Micro SD card inserted, blue LED is blinking.
Please make sure insert the SD card before connecting the poser cable.
Second, if the Micro SD card is removed from K11, intentionally or by an impact, while power
on, blue LED is blinking. Unplug the power cable and insert the SD card. Then reconnect the cable.
④ Blue LED on and red LED continuously blinking
First, if there are other files in the SD card recorded in other devices than K11, recording
doesn't work. In this case, format the Micro SD card before use.
Second, when there are other problems with the SD card, blue LED keeps blinking. Please
format the memory card before use.
31