Herunterladen Inhalt Inhalt Diese Seite drucken

Fehlermeldungs-E-Mail - Canon WUX4000 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Fehlermeldungs-E-Mail

Die Nachrichten der folgenden Fehlerliste werden gesendet, wenn ein Fehler des Projek-
tors auftritt.
Fehlerliste
Fehler in Bezug
Fehler-
auf Temperatur
name
Text
Fehler in Bezug
Fehler-
auf Lampe
name
Text
Fehler in Bezug
Fehler-
auf Lampenab-
name
deckung
Text
Fehler in Bezug
Fehler-
auf Lüfter
name
Text
Fehler in Bezug
Fehler-
auf die Stromver-
name
sorgung
Text
Fehler in Bezug
Fehler-
auf Objektivein-
name
heit
Text
Fehler in Bezug
Fehler-
auf Luftfilter
name
Text
Andere Fehlerar-
Fehler-
ten
name
Text
* Wenden Sie sich für Einzelheiten an Ihren Canon-Händler.
Temperature abnormality
The temperature inside the projector is too high for some reason or the
outside air temperature is higher than the specified one.
If the problem is inside the projector, check whether the projector is
installed and operated normally, turn off the projector to cool its inside,
and retry projection. If the same warning occurs again, the projector
may be defective. Contact your Canon dealer.
Faulty lamp
The lamp has burnt out. Replace the lamp with a new one. If the same
warning occurs again, the lamp drive circuit may be defective. Con-
tact your Canon dealer.
Faulty lamp cover
The lamp cover is open. Check whether the lamp cover is installed
properly. If it is installed properly, the lamp cover detection switch may
be defective. Contact your Canon dealer.
Faulty cooling fan
The cooling fan or another component may be defective. Contact your
Canon dealer.
Faulty power supply
The voltage of part of the power supply is abnormally high or any
other problem has occurred in the power supply. Contact your dealer.
Faulty lens connector
The lens cable is not connected to the lens unit. Check whether the
lens cable is connected to the lens unit properly.
If it is connected properly, the lens connector or cable may be defec-
tive. Contact your Canon dealer.
Faulty air filter unit
The air filter unit is not installed properly.
Check whether the air filter unit is installed properly.
If it is installed properly, the air filter unit detection switch may be
defective. Contact your Canon dealer.
Unknown Error
Code in Hexadezimalzahlen*
160

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis