Bosch Xeo Originalbetriebsanleitung Seite 28

28 | English
Technical file at:
Robert Bosch GmbH, PT/ESC, D-70745 Leinfelden-Echterdingen
2007
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 19.02.2010
Assembly
For Your Safety
Warning! Prior to any maintenance and cleaning, switch the
machine off and secure the lock-off button 2.
Battery Charging (see figure A)
Do not use other battery chargers. The supplied battery charg-
er is designed for the Lithium-Ion battery in your machine.
Observe the mains voltage! The voltage of the power supply
must correspond with the data given on the nameplate of the
battery charger. Battery chargers marked with 230 V can also
be operated with 220 V.
3–5 h
The lithium ion battery can be charged at any time without reduc-
ing its service life. Interrupting the charging procedure does not
damage the battery.
1 609 929 W36 | (18.2.10)
Dr. Eckerhard Strötgen
Head of Product
Certification
The battery is supplied partially charged.
To ensure full battery capacity, completely
charge the battery (at least 3–5 hours) be-
fore using for the first time.
The power tool cannot be used during the
charge procedure; it is not defective when
inoperative during the charging procedure.
Bosch Power Tools