G&D DP1.2-MUX3-ATC Installation Und Bedienung Seite 117

5. The following information is displayed in the dialog box that opens now:
Hardware information
FPGA1 rev:
Firmware name:
Firmware rev.:
Hardware rev.:
IP address A:
IP address B:
MAC A:
MAC B:
Serial number:
How to view the software information of a KVM switch:
1. Press (default) to open the on-screen display.
Ctrl+Num
2. Press F11 to open the configuration settings.
3. Use the arrow keys
4. Use the arrow keys
5. The following information is displayed in the dialog box that opens now:
Software information
ID:
Dev.:
Version:
Firmware:
Name:
FPGA1 revision
Firmware name
Firmware version
Hardware revision
IP address of Network A interface
IP address of Network B interface
MAC address of Network A interface
MAC address of Network B interface
Serial number of the KVM switch
to select System information
to select Software information
Physical ID of the KVM switch
Device class of the KVM switch
Firmware version
Firmware name
Name of the KVM switch
Configuration settings in the OSD
and press Enter .
and press Enter .
G&D DP1.2-MUX3-ATC · 45