Getting Started; Power Supply; Preparation - Pce Instruments Pce-Ve 800 Bedienungsanleitung

4

Getting started

4.1

Power supply

Power supply is provided the included AC mains adaptor (Input: 100 ... 240 VAC 50/60 Hz;
output: 5 V DC) which is connected to the interface under the cover on the right side of the main
device. During operation, the power supply should be provided by the integrated rechargeable
3000 mAh lithium battery.
4.2

Preparation

1. Insert SD card
The SD card should be inserted as in Fig. 1.
Attention! If the SD card cannot be inserted
easily, check the direction.
2. Connect display to camera unit
Attention! Check the orientation of the camera unit and of the connector of the hand-
held device and connect them carefully.
Fig. 2
© PCE Instruments
26
Fig. 1