Herunterladen Diese Seite drucken

Startup Display; Joystick Functions - STG-BEIKIRCH Analog 8in Technische Information Und Bedienungsanleitung

Lon module

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

LON Modules LON Modules Analog 8in, Analog 2out6in, Digital 8in/out, Relay 8out
LON Modules Analog 8in, Analog 2out6in, Digital 8in/out, Relay 8out
Start display
Depending on which insertion card type is used, a new display will be shown approx. five seconds after the start display.
After activating the navigation joystick, the display on the LON module changes accordingly. Below is an example of the
sequence of module LON Analog 8in and eight sensors that may carry a current of 4.2 mA each.
L O N A n a l o g 8 i n
C a r d 1 A - 4 I
C a r d 2 A - 4 I
Fig.: Start display

Joystick functions

Joystick to the right
The first row in the display shows the selected sensor connection (port).
The third row displays the channel function (analog input) and the measured current in mA.
P O R T X 3 . 1
A i n : 4 . 2 0
Fig.: Port view 3.1 and analog input value
► If the joystick is moved to the right, the display switches to the current value of the second channel. Each movement
to the right switches to the following channel. If the joystick is moved to the left, the display switches back to the previous
channel.
P O R T X 3 . 2
A i n : 4 . 2 0
Fig.: Port view 3.2 after moving the joystick to the right
► After moving the joystick to the right again, the display for the ninth channel is reached. This ninth channel displays
the power consumption of the overall module.
P O R T X 3 . 9
M o d u l c u r r e n t
A i n : 4 7 . 1 0
Fig.: Port view 3.9 after moving the joystick 9-times "Overall power consumption of the module"
Pressing the joystick
When pushing the joystick down to its zero position and while the analog input was pre-selected, the measurement unit
of the selected sensor channel is switched from milliampere [mA] to Pascal [Pal] or to the pre-configured measuring unit.
P O R T X 3 . 1
A i n :
1 . 2
Fig.: Selecting from [mA] to [Pa] unit
34
Joystick to the left
m A
m A
Fig.: Port view 3.8 after moving the joystick 8-times to the right
m A
P a
P O R T X 3 . 1
A i n : 4 . 2 0
Fig. Display after 5 seconds
P O R T X 3 . 8
A i n : 4 . 2 0
P O R T X 3 . 8
A i n : 4 . 2 0
P O R T X 3 . 8
A i n : 4 . 2 0
P O R T X 3 . 8
A i n : 4 . 2 0
m A
m A
m A
m A
m A
13424999465
01|

Werbung

Kapitel

loading

Diese Anleitung auch für:

Relais 8outAnalog 2out6inDigital 8inDigital 8out