LON Modules Analog 8in, Analog 2out6in, Digital 8in/out, Relay 8out
LON Analog Module 8in
General information
Used for the connection of 8 analog sensors, selectable as two- or three-conductor system. The rated level range of the
individual sensors is 4–20 mA. The inputs of the LON Analog Module 8in can be supplied with 50 mA for each sensor.
The inputs and outputs are short-circuit proof.
Connecting options
Inputs
•
Differential pressure transmitters/pressure sensors
•
Temperature sensors
•
CO
sensors
2
•
Air quality sensors
•
Light intensity sensors
•
Wind force sensor
•
Wind direction sensor
Connection example
J-Y(ST) Y 2 x 0.8 mm
up to 200 m J-Y(ST) Y 2 x 2 X 0.8 mm
up to 350 m J-Y(ST) Y 4 x 2 X 0.8 mm
Pa
°C
The cable type serves only as an example. Compliance with the cabling specifications for LON networks is mandatory.
1)
LON connection of LON modules using an adapter plate
2)
The specified cable cross-sections must not be reduced. They are defined for an ambient temperature of 20° C. If higher
temperatures are applied, the cross-section must be increased. All wires to the LON BOX carry a voltage of 24 V DC and
must be routed separately from the mains supply line. When routing the wiring, compliance with the VDE regulations is
mandatory.
26
LON-Bus
2 (1)
Analog Module 8in
2
2
CO
VOC
2
LON Bus
2)
Analog Module 8in
lux
m/s
%
LON-Bus
N
W
O
S
13424999465
01|