Jung JVP-SERVER-H-GB Anleitung Seite 2

GB
Visu Pro Server
Safety instructions
Electrical devices may only be
mounted and connected by electrically
skilled persons.
Serious injuries, fire or property damage pos-
sible. Please read and follow manual fully.
Fire hazard! Operation only with power supplies
listed as accessories.
Use only in dry rooms.
These instructions are an integral part of the
product, and must remain with the end cus-
tomer.
Device components
8
7
5
6
Fig. 1: Device components server
1. AUX
2. LAN
3. HDMI
4. USB 3.0
5. DC 12 V
6. ON/OFF
7. USB 2.0
8. SD card slot
FUNCTION
Intended use
- Visualization and operation of system statuses
and information on building automation in combi-
nation with JUNG Visu Pro software
- Operation in local IP networks that support DHCP
(Dynamic Host Configuration Protocol), or with
fixed IP address (IPv4)
- Desktop device, mounting on DIN rail according
to DIN EN 60715 possible
Product characteristics
- Fanless mini PC
- JUNG Visu Pro software pre-installed and acti-
vated
- Windows 10 Home (64-bit) pre-installed
- Quadcore Intel Atom processor
- 2 GB RAM
- 32 GB internal memory, partly used by operating
system
- 1 x HDMI 1.4
- 2 x USB 2.0
- 1 x USB 3.0
- 1 x LAN RJ45
- Dual-band WLAN
- The visualization can be realized with devices
with a browser suitable for HTML5 (e.g. latest
version of Chrome, Firefox or Safari)
- Access from max. 10 different clients possible
i Connection to KNX bus via interfaces
IPS200REG and IPR200REG
Scope of delivery
- JVP Server Pro including software
- Bracket for wall mounting or DIN rail mounting
- Operating instructions
- HDMI cable
- JVP-SERVER-H: EU power supply (Europlug)
- JVP-SERVER-H-GB: power supply incl. BS
adapter (UK), EU (Europlug) and CN (China)
Operation
Switching the device on/off
• Switching on: press push-button (6)
The device switches on
The status LED lights up blue
• Switching off: press push-button (6) >10 s
The operating system shuts down and switches
off
i In delivery state the device automatically logs
on with the user name JVP-User. The JVP-User
has only limited rights and is recommended for
normal operation of the visualization.
Information for electrically skilled
persons
Fitting and electrical connection
Connecting and fitting the device
• The device can be mounted on the wall or on a
DIN rail acc. to DIN EN 60715 with the the sup-
plied bracket. Snap the server onto the bracket.
• Connect the power supply
• Connect the LAN cable
1
2
Setting up the server
3
4
The system has already an admin account with
the password "jung" that can be used for system
configurations.
i Change the password after commissioning and
keep it in a safe place.
In a local network the device can be operated via
remote connection by means of the pre-installed
software TeamViewer12 – without monitor, key-
board and mouse.
Default IP address in delivery state:
192.168.178.111
Default password: 123456
i Change the password after commissioning and
keep it in a safe place.
In delivery state WLAN is deactivated.
i After configuration of the WLAN connection the
server connects to the internet automatically,
depending on the router settings.
The device uses Windows 10 as operating system.
i Microsoft updates will be downloaded automati-
cally if the device is connected to the internet.
An Update will cause the device to restart.
You can stop the server with the desktop icon
"Import and export of project data". This enables a
reliable import/export of projects. This program must
be run as administrator.
Visu Pro software
The software JUNG Visu Pro is installed on the
device. The software can process Facility Pilot 3
projects. Database entries, such as consumption
data, cannot be imported from previous versions.
The Visu Pro server is designed to display web
pages on various end devices by means of the
installed web server.
A permanent visualization on a connected monitor
is not recommended.
In delivery state the visualization with the Visu Pro
software takes place via port 8083. This port is
already activated in the firewall.
Accessories
KNX IP router
KNX IP interface
Technical data
Rated voltage
Power consumption
Ambient temperature
Storage/transport temperature
Stand-by power
Dimensions WxDxH
Protection class
Plug-in power supply
Primary voltage
Mains frequency
Secondary voltage
Secondary current
Protection class
Secondary cable length
Conformity
Albrecht Jung GmbH & Co. KG hereby declares
that the radio system type ref.-no. JVP-SERVER-
H and JVP-SERVER-H-GB meets the directive
2014/53/EU.
The complete text of the EU Declaration of Con-
formity is available at the Internet address:
www.jung.de/ce
IPR200REG
IPS200REG
DC 12 V
typ. 3 W, max. 7 W
-5 ... +45 °C
-25 ... +75 °C
2 ... 7 W
12 x 12 x 2.4 cm
II
AC 100 ... 240 V~
50 / 60 Hz
DC 12 V SELV
2 A
II
1.2 m