Care And Maintenance - Cocraft PRO WS30-A Bedienungsanleitung

Care and maintenance

• Always unplug the vacuum from the wall socket before cleaning/maintenance or
when it is not in use for an extended period.
• Clean the exterior of the vacuum cleaner using a lightly moistened cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• Make sure that all components are completely dry before storing the vacuum in
a dry dust-free place out of the reach of children.
Cleaning the pre-filter and cartridge filter
1. Make sure that the vacuum is unplugged from the mains.
2. Remove the filters.
3. Brush or shake any dirt and debris off the filters (in an appropriate outdoor area).
4. Refit the filters back onto the motor unit.
Cleaning the foam filter
1. Make sure that the vacuum is unplugged from the mains.
2. Remove the filter.
3. Hand wash the filter with mild soapy water and then rinse well with clean water.
4. Allow the filter to air dry. Refit the filter only when it is completely dry.
Cleaning the HEPA filter
1 2
6 7
1. Make sure that the vacuum is unplugged from the mains.
2. Release the filter cover by lifting the locking tab.
3. Remove the filter cover.
4. Remove the HEPA filter.
5. Brush the filter clean.
6. Refit the filter.
7. Refit the filter cover.
8. Push the locking tab down to lock the cover in place.
3 4
8
9
5