SoWash Hydrojet Bedienungsanleitung Seite 7

USER GUIDE
EN
THE PACKAGE CONTAINS:
• "Special Filter" Bag containing:
Special fi lter holder with internal thread
○
(X)
Special fi lter holder with external thread
○
(Y)
Aerator Filter (K)
○
Gasket (W - with rectangular sec on) for
○
Special fi lter holder with internal thread
Gasket (Z - with "step" sec on) for Special
○
fi lter holder with external thread
• Connector (B) with 80cm spiral hose (C)
and handle (D)
• Hydro-jet Head (E)*
• Hydro-pulser Head (F)**/***
• Key for unscrewing fi lters holder (G)***
• SoWash carrying bag***
• Mul lingual Manual
*1pc in the "Hydro-jet" and "Hydro-pulser"
package; 4pcs in "Family" package.
**1pc in the "Hydro-pulser" package; 4pcs
in "Family" package.
*** included only in the "Hydro-pulser" and
"Family" package.
FILTER HOLDER ASSEMBLY
To connect the SoWash aerator fi lter to the
tap (bath sink, shower** or bath tub):
1 - Unscrew the aerator fi lter holder of
your tap and make sure that the gasket
is removed (fi g.1). If necessary, use the
key (G - included only in the "Hydro-
pulser" and "Family" package ).
2a - In case of taps with internal thread
(fi g.2a), insert the aerator fi lter (K) inside
the special fi lter holder with external
thread (Y) and place the gasket with
"step" sec on (Z) on the aerator fi lter
(fi g.2a). Screw then to the tap the fi lter
holder with external thread (A1) just
assembled (fi g.3a).
2b - In case of taps with external thread
(fi g.2b), insert the gasket with
rectangular sec on (W) and the aerator
fi lter (K) inside the special fi lter holder
with internal thread (X) (fi g.2b). Screw
then to the tap the fi lter holder with
internal thread (A2) just assembled
(fi g.3b).
3 - Screw the new SoWash fi lter holder with
dry hands, using the connector (B) and
turning an -clockwise (fi g.4).
*The installa on of the fi lter holder to the
tap should be done only the fi rst me you
connect SoWash: the exclusive SoWash fi lter
holder for tap does not need to be removed
and replaced a er each use because it
allows normal use of the tap (fi g.5), providing
ven la on and water fi ltra on. (The special
fi lter holder SoWash connects to all the
taps with unscrewed fi lter holder according
UNI-EN 246 standards as almost all the taps
available on the market).
** Through the "mul func on shower joint"
present in the range of accessories and sold
separately.
To view the phases of assembly, watch videos
on www.sowash.it in the "video" and "how to
use it" sec ons.
HOW TO USE SOWASH
1. Mount your favourite accessory on the
handle (insert and rotate – fi g. 6).
2. Connect SoWash to tap fi lter holder (A1 /
A2) with the quick connect (B), by inser ng
and turning counterclockwise (fi g.7). For a
be er grip, hold the quick connector with
dry hands.
3. Leaning towards the sink, insert the head
into your mouth, making sure that the hole
for the exit of the water is directed to the
teeth.
4. Open the valve gradually un l it reaches
the desired temperature and pressure.
5. Rinse your mouth and interdental spaces
(see "Sugges ons for use").
SoWash is equipped with a safety valve
7