Bluetooth-Setup - Geneva AeroSphère Large Installationsanleitung

BlUETooTh SETUP
Mobile phones, tablets, and computers with Bluetooth can connect to the AeroSphère speaker and play music wirelessly. The mobile phone,
tablet, or computer must support Bluetooth A2DP. The AeroSphère speaker supports also the high quality codec aptX.
Initial Setup ( "pairing" ) with iPhone, iPad or iPod touch
1. Press on the remote control.
2. Select "Settings" on your iPhone. Select "General / Bluetooth". Turn
on Bluetooth. New Bluetooth devices are detected automatically.
3. Wait until "AeroSphère Small/Large ... ( Not Paired )" appears.
4. Select "AeroSphère...". The phone is now connecting ( "pairing" ) to
the AeroSphère speaker.
5. Once successfully paired, you can play music on an iPhone, iPad or
iPod touch and listen to it on the AeroSphère speaker.
PlAYInG mUSIc WITh BlUETooTh
Most smartphones connect automatically to the AeroSphère speaker
after the initial setup ( "pairing" ).
• Press on the remote control. When the AeroSphère speaker
connects, the display changes from a flashing blue to a
constant blue color.
• Now music that is playing on your smartphone streams
automatically to the AeroSphère speaker.
Status information on the display
Blue, constant: successfully connected.
Blue, fast flashing: searching for previously paired devices.
Blue, slow flashing: pairing / no active connection.
Pairing guide for other devices and mobile phones
Go to www.genevalab.com and select "Support."
Bluetooth settings on the iPhone
®
Selecting Bluetooth as audio output
( control center of iOS7 )
English
5