Geneva AeroSphère Large Installationsanleitung Seite 15

vI WI-FI SETUP For ThE AEroSPhèrE BASE
Time required: 5 minutes
once completed: the AeroSphère Base is connected to your Wi-Fi network. Now you are ready to use listen to FM, DAB+ and Audio CD from the
AeroSphère Base.
ovErvIEW
Streaming FM, DAB+ and audio CD wirelessly to AeroSphère speakers requires the AeroSphère Base to first be connected to the same Wi-Fi
network. The AeroSphère Base must be in same Wi-Fi network as the AeroSphère speakers.
WI-FI SETUP mEThoD
WPS
AeroSphère Network Setup webpage*
* Enabled by default when using the AeroSphère speaker for the first time.
WAC is not supported on the AeroSphère Base
WI-FI SETUP WITh WPS
What is needed for this setup?
Your Wi-Fi router needs to support WPS. There is no computer or smartphone needed for this setup.
Instructions
1. Turn the AeroSphère Base on.
2. Wait until the status light flashes in green.
3. Press the white "SETUP" button on the back of the AeroSphère Base.
4. On the Wi-Fi router press the WPS button. Typically a light on the
button starts to flash. If nothing happens, you may have to hold the
button for a few seconds. The AeroSphère speaker and the Wi-Fi
router are now starting to connect to each other.
5. Wait until the status light changes from fast blinking green to
flashing green to slowly flashing green. You are now successfully
connected to your Wi-Fi network.
What is WPS?
WPS ( Wi-Fi protected setup ) is a simple way to connect a new device
to a Wi-Fi network. WPS is a common feature on today's Wi-Fi wireless
routers or Wi-Fi access points. After pushing the white "SETUP" button
WI-FI SETUP WITh ThE AEroSPhèrE nETWork SETUP WEBPAGE
Follow the detailed description in the "Feature Guide" on aerosphere.genevalab.com
WhEn To USE ThIS mEThoD
Your Wi-Fi router has a WPS push button for easy network setup.
Advanced method.
go to the "Feature Guide" on aerosphere.genevalab.com
Troubleshooting
• Repeat the procedure.
• Upgrade the software on your Wi-Fi router.
• Try the "AeroSphère Network Setup webpage" method in the
next chapter.
• Check the Genevalab.com support page.
on the AeroSphère Base and the "WPS" button on the Wi-Fi access
point, within about a minute the AeroSphère Base will automatically
connect to the Wi-Fi network.
English
13