Blaupunkt Bluebot Kurzanleitung Seite 2

Congrats with your Blaupunkt Robot!
Follow these 7 easy steps to get started with Bluebot.
Step 1
Remove Bluebot from the box. The internal battery will be charged for its initial use.
Step 2
The box contains two cleaning components. One has bristles; the other has a rubber
edge. Take out the component with the rubber edge.
Step 3
Flip Bluebot over and attach the component with the rubber edge. This component is
ideal for general vacuum cleaning.
Step 4
Take out the two bristles marked 'L' and 'R' and attach them to the corresponding
holes on Bluebot's bottom. This may require applying some pressure.
Step 5
Take out the power adapter and charging base. Position them against the wall and
make sure that it can be easily spotted by Bluebot.
Step 6
Place Bluebot on its wheels near the chargingbase. Activate the robot by turning on
the on/off switch on the side of the unit. Takeout the remote control and remove the
plastic strip, which shields off the batteries.
Step 7
Point the remote control at Bluebot and press the on/off button to turn it on. It will
now clean your room using its automatic cleaning program!