Notice - kiwy SLF23 Gebrauchsanleitung

All ages given are approximate because all children grow at different
rates ; the weights given are the main safety issue.
II. Notice
SLF23 is approved for two different installation methods:
Method 1: UNIVERSAL category, the child and the child car seat are
secured through the vehicle's 3 point safety belt with retractor.
Method 2: SEMI-UNIVERSAL category, the child car seat is secured to
the vehicle's seat by the Isofix connectors, while the child is secured
with the vehicle's safety seat belt (see the list of compatible vehicles).
Method 1
UNIVERSAL category, use of the vehicle's 3 point safety belt only.
This is a "Universal" child restraint. It is approved to ECE Regulation 44/
04 for general use in vehicles and will fit most, but not all, car seats.
Proper installation is more easily achieved when the vehicle manual
shows that this is suitable for installation of "Universal" category child
restraint devices for the corresponding age groups (in this case, groups
2 and 3).
This child restraint has been declared "Universal" under more stringent
conditions than those applied to earlier products which do not carry
this notice.
If in doubt, contact either the child restraint manufacturer or the retailer.
Only suitable if the vehicle is fitted with a 3-point seat belts with retrac-
tor, approved to UN/ECE No. 16 or other equivalent standards.
Method 2
SEMI-UNIVERSAL category,use of safety belts and Isofix connectors.
SLF23 is a" Semi-universal"child car seat that may be installed on the
vehicle seats listed in the attached compatible vehicles list.
It is possible that other vehicles not listed in the list are suitable for this
child car seat.
When in doubt, contact your local dealer or Segrall srl.
2