Special Instructions - Clearaudio Smart Matrix Professional Bedienungsanleitung

6. Special Instructions

6.1 Maintenance
• For your own safety a frequent visual check of the mains cable is suggested. If any damage should
occur, repair or exchange should be done immediately using an approved electrician or institution!
Any service of Clearaudio products should only be done through certified Clearaudio dealers.
6.2 Transportation
If you transport or ship the Clearaudio
•
packaging must be used. Please pack the machine as it was packed originally by Clearaudio to ensure
secure transport.
6.3 Service
Smart Matrix Professional
• The
or by Clearaudio, otherwise the warranty will be void.
• If damage for any reason should occur where repair to the machine is necessary, it should be sent to
the selected dealer, distributor or directly to Clearaudio.
6.4 Warranty
• The warranty period for the
You can achieve the extended Clearaudio warranty time of three years, if you fill out the warranty
•
card and send it to the following address within two weeks after purchase:
Please note: If fluids which produce foam or which are acid-based have been used, or if the precautions
which have been mentioned in this instruction manual have not been followed, the warranty will be void.
Legal disclaimer:
Clearaudio refuse to cover any claims or damage to records or any other damage that have been caused
by misuse or mishandling of the
Page / Seite 12
Smart Matrix Professional
Smart Matrix Professional
should only be repaired by Clearaudio approved institutions or persons,
Smart Matrix Professional
Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Phone: +49 9131 40300100
Fax: +49 9131 40300119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Smart Matrix Professional
machine for any reason, the original
is two years.
machine!
© clearaudio electronic GmbH 2017
User manaul
Bedienungsanleitung