Herunterladen Inhalt Inhalt Diese Seite drucken

Tips For Saving Energy; Operating Noises; Preventing Noises - NEFF K5724 Serie Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Taking out the humidity filter
Fig. 1/9
The humidity filter over the humidity
container can be taken out for cleaning.
To do this, first take out the humidity
container and pull out the humidity filter.
Lift off the filter cover, Fig. +, and take
out the filter. Clean in lukewarm water,
leave to dry and re-assemble.
Installing extension rails
Fig. ,
1. To remove the extension rails, bend
slightly at the front in the direction of
the arrow.
2. Lift extension rail and detach from the
mounting.
3. To install the extension rail, insert into
the rear opening.
4. Insert extension rail into the front
opening and engage downwards.

Tips for saving energy

Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight or
near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Select 560 mm cavity depth.
A smaller cavity depth will result in a
higher energy consumption.
Allow warm food and drinks to cool
down before placing in the appliance.
Thaw frozen food in the refrigerator
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
Open the appliance as briefly as
possible.
Occasionally clean the rear of the
appliance to prevent an increased
power consumption.
The arrangement of the fittings does
not affect the energy rating of the
appliance.

Operating noises

Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.

Preventing noises

The appliance is not level
Please align the appliance with a spirit
level. If required, place something
underneath.
Containers or storage areas wobble
or stick
Please check the removable parts and
re-insert them correctly if required.
Bottles or receptacles are touching
each other
Move the bottles or receptacles slightly
away from each other.
en
27

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

K5714 serie

Inhaltsverzeichnis