Troubleshooting - Renkforce 1342393 Bedienungsanleitung

Manual settings
Manual setting of the time and date is only necessary when the radio-controlled table
clock is used outside of the DCF reception range or you want to display a different time
zone other than DCF time zone, or when the DCF reception is disrupted due to environ-
mental conditions.
Holding down button - (10) or button + (11) when configuring, the setting is made faster.
If in setting mode no key is pressed for approximately 15 seconds, the setting mode is
automatically aborted.
• Press the MODE / SET (9) button for approximately 3 seconds until the digits of the hour start
flashing to access the setting mode.
• Set the value pressing the button - (10) or the button + (11).
• Press the MODE/SET button (9) briefly to save the value and proceed to the next value that
needs to be set.
• The values are adjusted in the following order:
Hours, minutes, seconds
Seconds are only reset to "00".
Year, format of the date display, month, date
The date display format can be set to month/day or day/month.
Time zone
The time zone can be adjusted in the range of +/-12 hours towards the DCF time zone.
Language of weekday displays
GER = German DUT = Dutch
ENG = English ITA = Italian
FRE = French POL = Polish
SPA = Spanish CZE = Czech
Alarm function
Setting the alarm
• Press the MODE/SET button (9), until the alarm time is displayed.
• Press and hold the MODE/SET button (9) for about 3 seconds, until the digits of the hour blink.
• Set the time with the + button (10) or the - button (11).
• Press the MODE/SET button (9) briefly and set the minutes of the alarm with the + button (10) or
the - button (11).
• Press the MODE/SET (9) button again to save the settings.
To activate / deactivate the alarm
• Press the ALARM ON/OFF (12) button to activate or deactivate the alarm function.
• If the alarm function is activated, the alarm icon (3) is displayed.
Stopping the alarm signal
• When the alarm goes off, press any key (except the button SNOOZE/LIGHT (2)), to turn off the alarm.
• If no button is pressed the alarm will turn off after approx. 2 minutes automatically.
Snooze function
• When the alarm signal sounds, press the SNOOZE/LIGHT button (2) to activate the snooze func-
tion.
• After pausing for about 4 minutes the alarm signal will sound again.
• The symbol "Zz" is flashes in the display during pause.
The snooze function can be repeated for up to 8 times.
Display light
• The display light can be activated by pressing the SNOOZE/LIGHT button (2).
• The backlit display turns off automatically after about five seconds.
Thermometer
• The temperature indicator (6) shows the room temperature.
• Press the key (10) to toggle between the temperature units °C or °F.
• The temperature indicator (6) shows "HH.H", when the measuring range of the thermometer is
exceeded. If the temperature comes below the measuring range "LL.L" is shown).
Time display format
• Press button + (11) to select the desired time format (12 h or 24 h format).

Troubleshooting

By purchasing this radio table clock, you have acquired a product with state of the art design that
is operationally reliable. Nevertheless, problems or faults may occur.
Therefore, we would like to describe here how to eliminate possible faults.
The clock does not synchronise or only has temporary reception:
• The distance to the DCF transmitter is too great or restricted by geographical conditions.
• Relocate the product; switch off interfering devices such as TV sets, computers or microwave
ovens.
• Avoid a location in the vicinity of large metal surfaces, which may shield the radio signals. Win-
dows with a vapour deposited metal layer can also influence the signal reception.
• Place the clock near a window for synchronisation, and align the front or back side in the direc-
tion of Frankfurt (Germany).
• Leave the clock switched on overnight to reduce atmospheric interference.
The display shows confused symbols or nothing is displayed at all:
• Press the RESET button (13) with a sharp object (e.g. a straightened paper clip). The built-in
microprocessor is reset and the clock goes back into DCF reception mode.
Maintenance and cleaning
The product does not require any maintenance and should never be disassembled for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use aggressive detergents as these can cause discolouration of the case.
Do not press on the sensitive display surface.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the
household waste!
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Remove the batteries that may be inserted and dispose of them separately from the
product.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batteries. Do not
dispose of used batteries in the household waste!
Batteries/rechargeable batteries containing hazardous substances are labelled with
the symbol shown to indicate that disposal in household waste is forbidden. The sym-
bols of the critical heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (marking can
be seen on the battery/rechargeable battery, e.g., underneath the refuse bin symbol
shown on the left).
You can return used (rechargeable) batteries free of charge at the official collection
points in your municipality, our stores, or where ever (rechargeable) batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage.........................................3 V/DC
Batteries ........................................................2 x 1.5 V micro-cell (AAA)
Battery life ...................................................approx. 2 years
Time protocol ................................................DCF77
Alarm time .....................................................2 minutes
Snooze function............................................4 minutes
Measuring range thermometer .................-5 °C to +50 °C
Dimensions....................................................106 x 57 x 29 mm
Weight ............................................................110 g (without batteries)
Declaration of conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare that this
product adheres to the fundamental requirements and the other relevant regulations of Directive
1999/5/EC.
The Declaration of conformity for this product is available at www.conrad.com
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.