GIB Lighting LXG TIMER Benutzerhandbuch Seite 16

1.4 Remote control
Buttons of Remote Control
Table 4: Functions of Buttons
Button
1. In the non-setting state, long-press to enter Clock modification.
CLOCK/CHECK 2. Check the parameters of the ballast.
3. Cancel the alarm when it is launched.
Immediately send commands and turn on the HID lamp.
ON
Immediately send commands and turn off the HID lamp.
OFF
Select and send the maximum power 660W.
MAX
Select and send the minimum power 250W.
MIN
1. In the non-setting state, press to enter all parameters display or setting all parameters.
2. In the non-setting state, long-press to select enable / disable Sun Function.
MENU
3. In the setting state, press to exit setting without saving modification.
In the non-setting state, press to enter Timer parameter setting.
TIMER
1. In the setting state, press to adjust the parameter of the setting items.
˄ ˅
and
2. In the non-setting state, press to enter the single power setting.
In the setting state, select the setting items (shifting).
< and >
Confirm the modification during setting, and send out the parameters on the screen. It can also copy and

send same signal to other ballasts.
Power
Program
Start Time
Display of Remote Control
Function
Flashing while transmitting
Program
Clock (Local Time)
EN