Maintenance And Care; Options - SkyLine Zero Drag FR Handbuch

14. Maintenance and Care

Without the careful manufacture and the use of high-grade Material is the Skyline
Zero Drag FR a very long-life harness. But this longevity can only guaranteed, if
you done something, too:
controll the complete harness after every 10 flight hours thoroughly. All
ropes have to be tested for abrasion. Esp. frontal rope in the area of the
pulley
controll the strap/belt which runs thru the trimmer in the Kick-Ass System
(variation of angle of attack) and replace it, if damaged
controll main suspension
test Carbon-backplate for damages
controll all seams
The zipper and the slider have to be greased with silicon spray for
permanent smooth running
Never use sharp solvents to clean your harness. Clean it only with warm
water or, with persistent dirt, with curd soapsuds
Do not put the harness into a washing machine
Attention:
Before cleaning the harness you must remove the Rescue chute and attach him
first when he harness is perfect dry. By possible tread on damages, please
contact an expert.
FOR REPAIR; CHANGES OR INFORMATION
Don't hesitate to contact THE SKYLINE TEAM whenever you want.

15. Options

(surcharge):
- Leg loops with adjustable buckles
- adjustable Y-Leg Loops
- Extensionplate (this plate automatically extends the back supporting main plate)
- Direct Hangloop (being built on customer demands)
- Slider Lock (fixes slider on the back position; the slider lock will be released
automatically, if putting load out of the footpart when taking legs out of the
harness)
- Batwings short or long (aerodynamic neoprene cover, which hides shoulder,
upperarm and ellbow)
- GFK Hard Box
- Breast padding (detachable, with short or long mesh)
(without surcharge):
- Harbox with EPS perls
- Zipper extension
skyline-flightgear.de
18 18