Towing Activity; Biplace Flight; Rescue Chute; Rescue Chute Mounting - SkyLine Zero Drag FR Handbuch

Taking off and packing the Zero Drag FR
First open the main zipper completely, chest buckle, hip buckle and at least the
leg loops. Now you can take off the harness from your shoulders.
At folding up the harness, the extension plate has to be pushed back completely
and the footpart has to be as far in front as possible. Then you can stow the
harness into the rucksack. The inserts have to be taken out of the pockets before
packing. If you dont use the inserts, close the zipper of the pockets.

8. Towing activity

On each Skyline Zero Drag FR you can find two
towing loop on the inside on the chest belt, which
you can put to the outside. In the case of a regular
mounting of the towing release, the harness is
suitable towing.

9. Biplace flight

Biplace/Tandem flights are permitted

10. Rescue chute

Pay attention that the rescue system does work correctely.

11. Rescue chute mounting

Mounting the rescue chute into Skyline Zero Drag FR:
The rescue handle which will be delivered with this harness HAS to be used! If
possible, the rescue chute has to be mounted into outer container by SKYLINE or
by any other technician, following the succeeding illustrations. Pay attention to a
correct mounting of the release handle with a rated break point.
11 11
skyline-flightgear.de