Supplement to the Instructions for the 55001 Live Steam Locomotive
2.4 Adjustment screw on oiler
The adjustment screw on the oiler for the hot steam oil (see chapter 5.2) is
factory set to supply steam cylinders with the optimal amount of oil. Thus,
make sure that you do not change the setting of the adjustment screw.
Closing the adjustment screw can lead to the cylinders locking up. Opening
the screw past its preset setting will lead to over lubrication or, if turned far
enough, the screw may pop out.
Determining the optimal setting of the adjustment screw should only be
performed by a trained specialist!
20