Märklin 55001 Gebrauchsanleitung Seite 16

Supplement to the Instructions for the 55001 Live Steam Locomotive
Fig. 3: Plugging in the control electronics module
Step 1:
Plug the three-conductor socket from the electronic control circuit into the
plug opening "1" on the receiver.
Important:
All of the plug connections are designed so that the pin connections cannot
be confused. You should therefore not push the sockets in with force.
14
Fig. 4: Plugging in the servo
Step 2:
Plug the three-conductor socket from the servo in the locomotive into the plug
opening "2" on the receiver.